Entertainment & TV Units Dandenong

Dandenong Custom Cabinets builds entertainment & TV units Dandenong living rooms are actually shaped for, from a floating console to a floor-to-ceiling media wall. Every unit is set out around the real gear: the television's screen size and mount type, the depth of the receiver, the console that needs air, and the cables that have to get from one to the other without being seen. Carcasses are built square in the workshop from 16 to 18mm board, glued and dowelled, then packed level and scribed on site, which matters because a media wall spans wall to wall and shows every error. Ventilated equipment bays, concealed cable routes and soft-close hardware rated to around 40kg come as standard rather than extras. Twelve years of south-east Melbourne work and $20 million in public liability cover sit behind the job. Call 0440 132 026 for a free measure and quote.

GET A FREE QUOTE

Dandenong Custom Cabinets

Entertainment & TV Units Dandenong: Custom TV Units and Cabinets

TV units and consoles

A floating console is fixed to the wall with the floor left clear, which makes a smaller living room read larger and makes cleaning simple. A floor-standing unit carries more internal volume for the same length and needs no structural fixing, which suits a brick wall or a rental. Length is set from the screen rather than a round number: a console noticeably narrower than the television looks like a mistake, so the unit is usually run wider than the screen on both sides.

TV cabinets with storage

Drawers suit the things that actually live in a living room, which is remotes, cables, games and chargers, while doors suit a subwoofer or a games console that needs hiding but not sealing. A drawer at the centre directly below the screen is the most used cabinet in the piece, so it is specified with full-extension soft-close runners rated to around 40kg.

Scaled to the room

The brief changes with the stock. In the smaller post-war living rooms around Noble Park and Dandenong North, and in the 1960s homes off Cheltenham Road and around Thomas Street, the unit has to work at under 1,800mm without crowding a doorway, while the open-plan living areas in the newer Keysborough and Lyndhurst releases can carry a 3,000mm run and a full wall behind it.

Dandenong Custom Cabinets

Custom made entertainment units for your room and your gear

Built around the equipment, not a generic bay

Equipment bays are set out to the measured depth, width and height of the actual components plus clearance, because an AV receiver is typically deeper than a standard 400mm cabinet and will not close behind a door designed for a DVD player. Shelf heights are set from the component stack, with the tallest unit at the bottom where the carcass is strongest.

Gaming, sound and subwoofers

A games console draws air and needs a bay that is open at the back rather than a sealed box. A soundbar is either set on a dedicated shelf at screen height or recessed into the carcass so its face sits flush. A subwoofer is better left in a ventilated open base than enclosed, because enclosing it changes how it sounds.

Growing with the gear

Equipment is replaced far more often than joinery, so bays are specified with headroom above the current components and adjustable shelving where the stack is likely to change. Cable routes are oversized for the same reason.

Dandenong Custom Cabinets

Custom TV wall units and media walls

Media walls

A media wall takes the cabinetry floor to ceiling and wall to wall, with the screen recessed into the face so it sits flush rather than projecting. The recess is cut to the screen plus its mount, so the mount type has to be confirmed before fabrication: a fixed low-profile bracket needs about 40mm behind the panel, while a swing arm needs considerably more and a deeper void.

TV wall units

A wall unit stops short of a full media wall, combining a floating console with overhead cabinetry or open display either side of the screen. It costs less than a full wall and suits a room where a floor-to-ceiling build would overwhelm the proportions.

Setting out the face

Because a media wall reads as one surface, the setting-out matters more than the material: panel and door widths are calculated so the end panel is not a narrow offcut, and shadow lines are kept consistent across the whole face. The same approach is used for the feature panelling built as fitted joinery elsewhere in the house.

Dandenong Custom Cabinets

Dandenong TV cabinet makers and joinery workshop

Media joinery is built in a local workshop rather than assembled on site, and that is what makes a recessed screen and a flush face achievable. Dandenong has made things for a long time: the rolling stock factory opened in 1954 and still runs seventy years on as Alstom, and Dandenong South now holds more than 5,000 industrial businesses, so workshop fabrication is the local norm. Carcasses are cut, glued and dowelled square on a bench, then delivered and scribed into the room, which is the only way a 3,000mm run stays true against a bowed wall. The cabinetmaker who measures the room is the one who sets out the face and installs it, so a decision about a screen recess does not pass through a salesperson. Every job carries $20 million in public liability cover.

Dandenong Custom Cabinets

Ventilation, cable management and a square build

Ventilation

AV equipment fails from heat before it fails from age, so bays are ventilated rather than sealed: open backs, rear cut-outs into a common cable void, and a gap above each component rather than a shelf sitting on it. Where a bay has to be fully enclosed behind a door, the door is vented or the back is left fully open to the void.

Cable management

A vertical cable void runs behind the screen recess down to the equipment bay, oversized so cables can be changed later without dismantling anything. Power and data are brought to the void by a licensed electrician, coordinated so the rough-in happens before the cabinetry lands. Grommets are set at the back of each shelf rather than drilled wherever a cable happens to fall.

A square build

Boxes are 16 to 18mm board, glued and dowelled, built square in the workshop. Shadow lines and reveals are tuned to within about 2mm at install, and the screen recess is checked against the actual panel before the face is fixed. The nearest long-run Bureau of Meteorology station, Moorabbin Airport (086077), records July daytime highs near 13°C and October as the wettest month at about 59mm, and board moves with seasonal humidity in that range, so a wall-to-wall face is detailed with an expansion allowance at the ends rather than jammed hard.

Dandenong Custom Cabinets

Why Dandenong households choose these units

Living rooms are where household size shows up in the brief. The suburb recorded 30,127 residents at the 2021 Census with an average household of 2.8 people, a median weekly household income of about $1,267 and a high proportion of renters, so a good share of the work is a well-built console in laminate rather than a full wall. Extended-family households across Greater Dandenong often use the living room as the main shared space, which pushes toward more storage, a larger screen and a unit that takes daily handling. In the owner-occupier estates the full media wall with a recessed screen and two-pac face is the common brief, because the room was designed with a feature wall in mind. Dandenong Custom Cabinets quotes against whichever applies, and the specification is adjustable before anything is cut.

Dandenong Custom Cabinets

What a custom media unit costs

Media joinery runs from a modest console to a whole-wall centrepiece, so the ranges below are indicative planning figures rather than a quote. A floating wall-hung TV console in laminate commonly runs from around $1,500 to $3,500 depending on length and drawer count. A floor-standing entertainment unit with doors and drawers sits in a similar to slightly higher band once storage is added. A full floor-to-ceiling media wall is the big variable: a straightforward wall generally starts around $4,000 and rises with length, the depth of the screen recess, and whether it carries a fireplace or integrated lighting. The cost drivers are the face area, the number of drawers, and the finish: two-pac on the visible face adds meaningfully while the carcass specification stays the same. A common way to hold a budget is a laminate carcass with two-pac only on the face panels and returns that are actually seen. An itemised written quote follows the free measure. Call 0440 132 026 to book one.

Dandenong Custom Cabinets

Custom media wall vs flat-pack

Flat-pack and retail TV units are easy to buy locally, with IKEA on Princes Highway, Springvale and Bunnings both within the service area, and for a rental or a first home they do the job. Three things separate them from built joinery. The first is fit: a retail unit comes in fixed lengths, so it rarely relates to the screen above it or the wall it sits against, and a media wall is not available at all. The second is heat and cables. Retail units are sealed boxes with a small hole at the back, which is why AV equipment cooks in them, whereas a built bay is ventilated into a common void sized for cable changes. The third is the screen. Recessing a television so it sits flush requires the recess to be cut to that panel and its mount, which cannot be done with a bought unit. Load matters too: a 75-inch screen on a wall-hung console needs the fixing designed for it, not a bracket into plasterboard. The same carcass and setting-out approach carries into built-in storage elsewhere in the house and into home office cabinetry where the living room doubles as a workspace. Retail suits a temporary set-up. For a room where the screen and the storage are meant to look built in, custom is the better long-term value.

TESTIMONIALS

What Our Entertainment & TV Units Customers Say About Us

The Process

3 Step Process For Your Entertainment & TV Units Needs

Measure and design

It starts with a proper site measure, not a guess. We come to your home or premises anywhere across Dandenong and the south-east, measure every wall including where it runs out of square, and talk through how you use the space. Then we draw a layout and help you choose door styles, finishes and a compliant benchtop, followed by a fixed written quote so you know the cost before anything is built.

Build in the workshop

Once you sign off, we build your cabinetry in the workshop to fine tolerances. Boxes are glued, dowelled and assembled dead square, using HMR moisture-resistant board in wet areas, heat-sealed edge-banding, and quality Blum or Hettich soft-close hardware rated well beyond 100,000 cycles. Building offsite means precision, quality control and far less disruption in your home.

Install and adjust

We install on site, scribing and packing everything level to your real walls and setting reveals to within about 2mm even where the wall behind is not plumb. Natural stone benchtops are templated and fitted through licensed stonemasons. We finish by adjusting every hinge and drawer, cleaning up, and walking you through your new joinery. One local team from first measure to final drawer.

Entertainment & TV Units In Donvale

FREQUENTLY ASKED QUESTIONS

Everything you need to know about our Entertainment & TV Units In Donvale

Can you build around my existing TV and equipment?

Yes, and the existing gear is measured rather than assumed. Screen size and mount type set the recess or the console length, and each component's real depth, width and height sets its bay, because an AV receiver is usually deeper than a standard 400mm cabinet. Bringing model numbers to the measure is the most reliable approach. Bays are then specified with headroom above the current stack, since equipment gets replaced far more often than joinery.

How do you stop the AV equipment overheating?

Bays are ventilated rather than sealed. Backs are left open into a common cable void, rear cut-outs let air move through, and a clear gap is kept above each component instead of a shelf sitting on it. Where a bay must sit behind a closed door, the door is vented or the back is fully open to the void. Heat is what kills AV equipment first, so this is a build decision rather than an optional extra.

Will the cables be hidden?

Yes. A vertical cable void runs behind the screen recess down to the equipment bay, deliberately oversized so cables can be changed later without dismantling the unit. Grommets are positioned at the back of each shelf rather than drilled wherever a cable happens to land. Power and data are brought to the void by a licensed electrician, with the rough-in sequenced before the cabinetry is installed.

Can you mount the television for me?

Television mounting is coordinated rather than carried out as part of the cabinetry, and the bracket is confirmed before fabrication because it determines the recess depth. A fixed low-profile bracket needs about 40mm behind the panel, while a swing arm needs considerably more and a deeper void. Where the screen is heavy, the fixing is set into structure rather than plasterboard, and any noggings or backing plate go in before the wall is lined.

Can a media wall include a fireplace or lighting?

Yes, and both are planned with the cabinetry rather than added to it. An electric fireplace needs a bay at the manufacturer's specified clearances, with nothing heat-sensitive directly above the outlet. Integrated LED lighting is usually run as a concealed strip behind a shadow-line reveal or under a floating shelf, so no diode is visible. Both require a licensed electrician and a rough-in before the face panels are fixed.

What finishes can I have on a TV unit?

Finishes run from melamine and high-pressure laminate through timber veneer to sprayed two-pac polyurethane. Laminate is the practical default and handles daily handling well. Veneer suits a face panel where real grain is wanted across a large surface, with grain direction and sheet matching specified at the drawing stage. Two-pac gives the deepest, most seamless finish and can be colour-matched, and a common approach is a laminate carcass with two-pac only on the panels that are seen.

Request A Free Entertainment & TV Units Quote

GET A FREE QUOTE