Bathroom Vanities Dandenong

Dandenong Custom Cabinets builds bathroom vanities Dandenong homes can fit properly, made to measure from compact powder-room widths up to 1,800mm twin-bowl family units. Freestanding, wall-hung and floating vanities are built to the room, the plumbing and the basin, rather than bought in a fixed width and packed out at one end. Wet-zone carcasses are specified in 16 to 18mm moisture-resistant HMR board with every exposed edge heat-sealed and every cut-out sealed, because an unsealed core is what swells and fails first in a bathroom. Tops are fitted in compliant materials only, and engineered stone is neither fabricated nor installed under the national prohibition in force since 1 July 2024. Twelve years of south-east Melbourne work and $20 million in public liability cover sit behind every vanity. Call 0440 132 026 for a free measure and quote.

GET A FREE QUOTE

Dandenong Custom Cabinets

Bathroom Vanities Dandenong: Custom Vanity Cabinets, Basins and Tops

Vanity cabinets built to the room

A custom vanity is set out from three fixed points: the position of the waste, the position of the tap tails, and the clear width between walls or fixtures. Cabinetry is then built to those dimensions, which is how a vanity ends up wall to wall with no filler strip and no awkward 40mm gap beside the shower screen.

Basins

Under-mount basins sit beneath the benchtop and leave the top easy to wipe clean. Above-counter basins read as a feature and free up drawer depth below, since the bowl no longer intrudes into the cabinet. Integrated basins are formed in the same material as the top, which removes the join entirely and suits a family bathroom where grime collects at a silicone line.

Vanity tops

Laminate is the value option and handles a bathroom perfectly well with sealed edges. Porcelain resists heat, scratching and staining and suits a main bathroom in daily use. Natural granite and marble are fabricated through licensed stonemasons, with marble requiring sealing and more care around cosmetics and cleaning products. Solid-surface tops allow an integrated bowl with no visible join.

Dandenong Custom Cabinets

Vanity sizes: 750mm, 900mm, 1200mm and 1500mm

600mm to 900mm

A 600mm vanity suits a powder room or an ensuite where the door swing limits the wall, and generally carries a single door or two shallow drawers. A 750mm unit is the common ensuite size and fits a single bowl with one usable drawer bank beside the waste. A 900mm vanity is the standard main-bathroom width and is the point at which a full drawer bank plus a cupboard becomes workable.

1200mm to 1500mm

At 1200mm a single bowl can sit off-centre, which produces a genuinely usable run of bench on one side rather than two narrow strips. At 1500mm a twin-bowl layout becomes possible, though two bowls at that width leave little bench between them; a single bowl with a long bench is often the better use of 1500mm.

1800mm and twin bowls

1800mm is where a twin-bowl family vanity works properly, with bench space between the bowls and a drawer bank under each. Above that width the top is usually jointed, and the join position is set at the design stage so it falls where it will not be seen.

Dandenong Custom Cabinets

Freestanding, wall-hung and floating vanities

Freestanding

A freestanding vanity sits on the floor with a kickboard or on legs, carries its own weight, and is the most forgiving option in an older bathroom where the floor is uneven. It also hides the waste and the tap tails inside the cabinet without special detailing.

Wall-hung and floating

A wall-hung vanity is fixed to the wall with the floor left clear, which makes a small bathroom read larger and makes the floor easy to clean. It requires solid fixing: timber noggings or a steel bracket set into the stud wall, which has to be in place before the wall is lined. In the post-war brick-veneer stock around Noble Park and Dandenong North, and the 1960s homes in the streets off Cheltenham Road and Thomas Street, that fixing is often added during the renovation, so it is planned with the plumber rather than discovered on install day.

Choosing between them

A floating vanity looks lighter and cleans more easily; a freestanding unit offers more internal volume for the same width and costs less to install. Where the waste exits the floor rather than the wall, freestanding is usually the simpler answer.

Dandenong Custom Cabinets

Custom bathroom cabinets and storage units

Mirror and shaving cabinets

A mirror cabinet recovers storage from the wall above the vanity, which is the only unused surface in most bathrooms. Recessing it into the wall cavity keeps the face flush, while a surface-mounted unit suits a brick wall where recessing is not practical.

Tallboys and bathroom storage units

A tallboy beside the vanity takes towels, spare toiletries and cleaning products, and uses a 300mm to 400mm strip of wall that would otherwise stay empty. Open shelving at the top with doors below keeps everyday items reachable and the rest contained.

Laundry and powder-room combinations

Where one wet room does both jobs, the vanity and the laundry cabinetry are built as a single continuous run so the bench line does not break. Specifying both together costs less than two separate jobs, because the material is cut from the same sheets.

Dandenong Custom Cabinets

Built for Dandenong bathrooms and wet areas

Board and sealing

Wet-zone carcasses are 16 to 18mm moisture-resistant HMR board, glued and dowelled square in the workshop. Every exposed edge is heat-sealed with matching edge-banding and every cut-out around the waste and tap tails is sealed. Moisture-resistant is not waterproof, and it is honest to say so: the detailing keeps water out of the core, not the board grade.

Climate and the wet room

The nearest long-run Bureau of Meteorology station, Moorabbin Airport (086077), records July daytime highs near 13°C and October as the wettest month at about 59mm, a temperate maritime pattern rather than a tropical one. A cold July bathroom is the condensation problem here: warm shower air meets a cold external wall and the moisture lands on the nearest surface, which is often the vanity end panel. End panels are therefore sealed on both faces and the carcass is held off the wall line so air can move behind it.

Hardware and compliant tops

Drawers run on Blum or Hettich full-extension soft-close runners rated to around 40kg, with hinges beyond 100,000 cycles and three-way adjustment so reveals tune to within about 2mm. Tops are fitted in compliant materials only, and stone and porcelain tops are templated after the cabinetry is installed.

Dandenong Custom Cabinets

Why Dandenong homeowners choose these vanities

Bathrooms are the room where the local housing split shows up most in the brief. The suburb recorded 30,127 residents at the 2021 Census with a median weekly rent of about $319 and a high proportion of renters, so a large share of vanity work is rental-grade: laminate top, sealed HMR carcass, hard-wearing fronts and hardware that survives turnovers. Owner-occupiers renovating a 1960s bathroom more often step up to porcelain or natural stone and a floating unit, because the whole room is being re-tiled anyway and the fixing can be built in. Larger extended-family households push toward twin bowls and more drawer storage, since a single 900mm vanity cannot serve a bathroom used by five people. Dandenong Custom Cabinets quotes against the brief that applies, carries $20 million in public liability cover, and keeps the same team across measure, build and install.

Dandenong Custom Cabinets

What a custom vanity costs

Every bathroom is quoted on its own drawings, so the ranges below are an indicative guide for planning rather than a quote. A compact powder-room vanity in laminate typically runs from around $900 to $1,500 supplied and installed. A standard 900mm single-bowl vanity with soft-close drawers and a laminate top usually sits around $1,800 to $3,000. A 1,500mm to 1,800mm twin-bowl family vanity generally lands around $3,500 to $6,500, with the top the biggest single swing: laminate is the value option while natural granite through a licensed stonemason sits at the other end. Adding a mirror cabinet or a matching tallboy is usually a few hundred dollars each rather than a proportional increase, because both are small carcasses. Wall-hung units can cost slightly more to install where fixing has to be added to the wall. An itemised written quote follows the free measure. Call 0440 132 026 to book one.

Dandenong Custom Cabinets

Custom vanity vs flat-pack

Flat-pack and off-the-shelf vanities are sold locally at IKEA on Princes Highway, Springvale, at Bunnings and through bathroom warehouses, and in a new bathroom built to suit them they are a reasonable buy. The problem is that a bathroom is the smallest room in the house with the most fixed obstacles: the waste, the tap tails, the shower screen, the door swing and the toilet all compete for the same 2,000mm of wall. A fixed-width vanity rarely lands between them, so the result is a gap at one end, a cabinet that fouls the door, or a bowl that sits off-centre from the mirror. Made-to-measure cabinetry is built to the real clear width and to the plumbing as installed, so the unit runs wall to wall and the bowl centres where it should. The durability difference is the wet-area detailing rather than the look: HMR board in the carcass, heat-sealed edges, sealed cut-outs around the waste, and branded soft-close hardware as standard. Most off-the-shelf units use a standard particleboard carcass with a raw edge behind the kickboard, which is where swelling starts. The same wet-area construction carries into built-in bathroom and linen storage handled by one accountable team. Off-the-shelf suits a quick refresh in a square, modern bathroom. For a vanity that fits the room and survives it, custom is the better long-term value.

TESTIMONIALS

What Our Bathroom Vanities Customers Say About Us

The Process

3 Step Process For Your Bathroom Vanities Needs

Measure and design

It starts with a proper site measure, not a guess. We come to your home or premises anywhere across Dandenong and the south-east, measure every wall including where it runs out of square, and talk through how you use the space. Then we draw a layout and help you choose door styles, finishes and a compliant benchtop, followed by a fixed written quote so you know the cost before anything is built.

Build in the workshop

Once you sign off, we build your cabinetry in the workshop to fine tolerances. Boxes are glued, dowelled and assembled dead square, using HMR moisture-resistant board in wet areas, heat-sealed edge-banding, and quality Blum or Hettich soft-close hardware rated well beyond 100,000 cycles. Building offsite means precision, quality control and far less disruption in your home.

Install and adjust

We install on site, scribing and packing everything level to your real walls and setting reveals to within about 2mm even where the wall behind is not plumb. Natural stone benchtops are templated and fitted through licensed stonemasons. We finish by adjusting every hinge and drawer, cleaning up, and walking you through your new joinery. One local team from first measure to final drawer.

Bathroom Vanities In Donvale

FREQUENTLY ASKED QUESTIONS

Everything you need to know about our Bathroom Vanities In Donvale

Are your bathroom vanities waterproof?

Moisture-resistant HMR board in 16 to 18mm is specified for the wet zones, and it resists moisture rather than being waterproof. It is honest to say so, because no cabinet board is waterproof. What keeps a vanity sound is the detailing: every exposed edge heat-sealed with matching edge-banding, and every cut-out around the waste and tap tails sealed before install. A standard particleboard carcass with a raw edge behind the kickboard is what swells first.

Can you match my existing tiles and bathroom?

Yes. Finish selection happens with physical samples against the actual tiles rather than from a colour name, because bathroom tiles shift noticeably under different lighting. Laminate and two-pac can both be matched closely, and two-pac can be colour-matched outright where an exact match matters. Where the tiles are an older discontinued range, pulling the vanity finish toward a neutral usually reads better than chasing a near-match that lands slightly wrong.

Do you supply the basin and tapware, or do I?

Either works. Basins and tapware can be supplied as part of the job, or the client can supply their own and the cabinetry is built to them. Supplying your own is common and perfectly workable, provided the actual models are confirmed at the design stage, because basin dimensions and tap hole spacing determine the cut-outs. Changing a basin after the top is templated means a new top.

How long does a custom vanity take?

Allow around three to four weeks end to end for a custom vanity. The measure and design stage takes about a week, workshop fabrication runs two to three weeks, and installation is usually a day. A stone or porcelain top adds roughly a week because templating happens after the cabinetry is installed. Where the vanity is part of a full bathroom renovation, the install slots in after waterproofing and tiling.

Can you build a double vanity for a shared family bathroom?

Yes, and 1,800mm is the width where a twin-bowl layout works properly, with bench space between the bowls and a drawer bank under each. At 1,500mm two bowls fit but leave little usable bench, so a single bowl with a long run of bench is often the better choice at that width. Above 1,800mm the top is usually jointed, and the join is positioned at the design stage so it falls where it will not be seen. Drawer banks on soft-close runners rated to around 40kg take the load of a shared family bathroom.

Do you work with engineered stone benchtops?

No. Engineered stone is neither fabricated nor installed, under the national prohibition that took effect on 1 July 2024. The compliant alternatives for a vanity top are laminate, porcelain, natural granite or marble through licensed stonemasons, and solid-surface materials that allow an integrated bowl. Porcelain is the closest practical substitute for the look and performance most clients were buying engineered stone for.

Request A Free Bathroom Vanities Quote

GET A FREE QUOTE